Latest 0.0.1
Homepage https://github.com/sbaidon/SwiftPi
License MIT
Platforms ios 8.0
Authors

CI Status
Version
License
Platform

Example

To run the example project, clone the repo, and run pod install from the Example directory first.

Requirements

Have WebIOPi running on your raspberry

Download: http://webiopi.trouch.com/

Documentation: http://webiopi.trouch.com/RESTAPI.html

How to run WebIOPi : sudo webiopi -d -c /etc/webiopi/config

WebIOPi-0.7.1 Patch for Raspberry B+, Pi2, and Pi3: https://github.com/doublebind/raspi

Installation

SwiftPi is available through CocoaPods. To install
it, simply add the following line to your Podfile:

pod "SwiftPi"

Options

Parameters should be of type GPIO, MODE or VALUE so errors can be avoided, enums provided can be seen below

GPIO

  public enum GPIO : String{
        case ONE = "1"
        case TWO = "2"
        case THREE = "3"
        case FOUR = "4"
        case FIVE = "5"
        case SIX = "6"
        case SEVEN = "7"
        case EIGHT = "8"
        case NINE = "9"
        case TEN = "10"
        case ELEVEN = "11"
        case TWELVE = "12"
        case THIRTEEN = "13"
        case FOURTEEN = "14"
        case FIFTEEN = "15"
        case SIXTEEN = "16"
        case SEVENTEEN = "17"
        case EIGHTEEN = "18"
        case NINETEEN = "19"
        case TWENTY = "20"
        case TWENTYONE = "21"
        case TWENTYTWO = "22"
        case TWENTYTHREE = "23"
        case TWENTYFOUR = "24"
        case TWENTYFIVE = "25"
        case TWENTYSIX = "26"
        }

Modes

    public enum MODE : String {
        case IN = "in"
        case OUT = "out"

    }

Values

   public enum VALUE : String {
        case OFF = "0"
        case ON = "1"

    }

How to use

var swiftPi = SwifPi(username: "username", password: "password", ip:"ip", port: "port")

var mode = swifPi.getMode(.ONE)

swiftPi.setMode(.ONE, .IN)

var value = swiftPi.getValue(.ONE)

swiftPi.setValue(.ONE, .ON)

//Asynchronous calls

swiftPi.getModeInBackground(.ONE){ (result) -> Void in
            if let res = result {
              //callback code       
        } }

swiftPi.getValueInBackround(.ONE){ (result) -> Void in
            if let res = result {
                //callback code

            }
        }

swiftPi.setValueInBackground(.ONE, .ON) { (result) -> Void in
            if let res = result {
                //callback code
            }
        }

swiftPi.setModeInBackground(.ONE, .IN) { (result) -> Void in
            if let res = result {
                //callback code
            }
        }

Author

sbaidon, ardzoht, toniohdez43, PkBadger

License

SwiftPi is available under the MIT license. See the LICENSE file for more info.

Latest podspec

{
    "name": "SwiftPi",
    "version": "0.0.1",
    "summary": "Control Raspberrys GPIOs with Swift",
    "description": "TODO: Add long description of the pod here.",
    "homepage": "https://github.com/sbaidon/SwiftPi",
    "license": {
        "type": "MIT",
        "file": "LICENSE"
    },
    "authors": {
        "sbaidon, toniohdez43, ardzoth, pkbadger93": "[email protected]"
    },
    "source": {
        "git": "https://github.com/sbaidon/SwiftPi.git",
        "tag": "0.0.1"
    },
    "platforms": {
        "ios": "8.0"
    },
    "source_files": "SwiftPi/**/*"
}

Pin It on Pinterest

Share This