Latest 0.1.0
Homepage https://github.com/neekeetab/Stapler
License MIT
Platforms ios 8.0
Dependencies ReactiveCocoa
Authors

Stapler


Stapler is a Swift micro framework for iOS that encapsulates all the logic for fetching and refreshing paginated data. Stapler performs necessary backend requests and provides you with a ready-to-bind-to-UI reactive data source.

No more reinventing the wheel – Stapler will save you a ton of time next time you need to display paginated data in your collection view.

Note, that Stapler relies heavily on ReactiveSwift. Also, you will most likely want to use ReactiveCocoa for easy UI bindings. You’re supposed to be familiar with both of these frameworks, albeit you can use your own reactive extensions instead of (or along with) ReactiveCocoa.

Carthage compatible CocoaPods compatible GitHub release Swift 4.0 platforms

Installation

Carthage

If you use Carthage to manage your dependencies, simply add
Stapler to your Cartfile:

github "neekeetab/Stapler" ~> 0.1

If you use Carthage to build your dependencies, make sure you have added Stapler.framework, ReactiveSwift.framework, ReactiveCocoa.framework and Result.framework to the "Linked Frameworks and Libraries" section of your target, and have them included in your Carthage framework copying build phase.

CocoaPods

If you use CocoaPods to manage your dependencies, simply add
Stapler to your Podfile:

pod 'Stapler', '~> 0.1'

Git submodule

  1. Add the Stapler repository as a submodule of your application’s repository.
  2. Run git submodule update --init --recursive from within the Stapler folder.
  3. Drag and drop Stapler.xcodeproj, Carthage/Checkouts/Result/Result.xcodeproj, Carthage/Checkouts/ReactiveSwift/ReactiveSwift.xcodeproj, and Carthage/Checkouts/ReactiveCocoa/ReactiveCocoa.xcodeproj into your application’s Xcode project or workspace.
  4. On the “General” tab of your application target’s settings, add Stapler.framework, ReactiveSwift.framework, ReactiveCocoa.framework and Result.framework to the “Embedded Binaries” section.
  5. If your application target does not contain Swift code at all, you should also set the EMBEDDED_CONTENT_CONTAINS_SWIFT build setting to “Yes”.

Usage

Stapler makes pagination handling easy. Here’s how to use it:

1. PaginatedResponse Protocol

Conform your paginated server response to the PaginatedResponse protocol.

/**
 Protocol to conform data structures representing paginated server responses to.
 */
public protocol PaginatedResponse {
    associatedtype Item
    var items: [Item] { get }
    var total: UInt { get }
}

2. View Model

In a view model (or somewhere else if you don’t follow MVVM), initialize Stapler, providing a SignalProducer that represents the network request.

/* Suppose we have this declared somewhere in the project
class NetworkService {

    //...

    struct ItemsResponse: PaginatedResponse {
        let total: UInt
        let items: Item
    }

    /// Sends ItemsResponse and completes on success, Error otherwise. 
    static func items(offset: UInt, size: UInt) -> SignalProducer<ItemsResponse, Error>

}
*/

class ViewModel {

    let stapler = Stapler(pageSize: 10) { offset, size in
        // return network request with PaginatedResponse as a value type
        NetworkService.items(offset: offset, size: size)
    }

}

Have you noticed? It’s only 3 lines of code :bowtie: for a view model!

3. View

All that is left now is to bind stapler from the view model to your view, usually consisting of one of the UICollectionView subclasses. You can find an example of how to do it in the demo project section.

Public interface

Stapler aggregates everything needed to bind your UI to. Here’s what you get:

/**
 Contains all the logic for fetching and refreshing paginated data. Provides
 reactive data source to bind your UI to. Standardizes the process of getting
 paginated content and (arguably) makes your life (a little bit) easier.
 */
open class Stapler<Response: PaginatedResponse, ResponseError: Error> {

    /**
     An action to perform on initial load (usually in viewDidLoad). Is
     convenient in case you need yet another loading indicator for the initial
     loading. If you don't need that, it's safe to start initial load with the
     refresh action below.
     */
    public let initialLoadAction: Action<(), (), ResponseError>

    /**
     An action to perform to reload the content. Loads first page only. To load
     the rest call loadNextPageIfNeeded().
     */
    public let refreshAction: Action<(), (), ResponseError>

    /**
     Property containing deserialized elements obtained from paginated server
     responses.
    */
    public let items: MutableProperty<[Response.Item]>

    /**
     Property containing the number of pages loaded. Initially is 0.
    */
    public let pages: MutableProperty<UInt>

    /**
     Property containing the total number of elements on the backend size.
     Initially is 0.
     */
    public let total: MutableProperty<UInt>

    /**
     Property that tells you wheather you should show an activity indicator for
     pages being loaded after the first page is loaded. Initially is false.
     Becomes true at the start of 2nd page loading and stays true until all data
     is loaded (no pages left). Note, that you can obtain execution status for
     the first page with startInitialLoadingAction.isRefreshing if it's an
     initial load or refreshAction.isRefreshing if it's a load after
     refreshing.
     */
    public let shouldShowNextPageActivityIndicator: Property<Bool>

    /**
     Signal that notifies about errors that appeared
     while loading 2nd page and further. Note, that you can access errors for
     the first page with startInitialLoadingAction.errors if it's an initial
     load or refreshAction.errors if it's a load after refreshing.
     */
    public let errors2ndPageAndLater: Signal<ResponseError, NoError>

    /**
     Loads next page if needed. Usually you should call this function when the
     last cell in a collection view becomes visible. It's safe to call
     loadNextPageIfNeeded() many times subsequently – if there's already a page
     being loaded, all of these calls will be ignored. If there are no pages left,
     calling this function will have no effect.
     */
    public func loadNextPageIfNeeded() 

    /**
     - parameters:
         - pageSize: Number of elements per page.
         - request: A closure to provide request to your backend for given offset
            and size.
     */
    public init(pageSize: UInt,
         request: @escaping (_ offset: UInt, _ size: UInt) -> SignalProducer<Response, ResponseError>) 

}

Demo project


To get a better understanding of how Stapler works, take a look at the demo project. Here’s how to run it:

  1. Clone the Stapler repository.
  2. Retrieve the project dependencies using one of the following terminal commands from the Stapler project root directory:
    • git submodule update --init --recursive OR, if you have Carthage installed
    • carthage checkout
  3. Open Stapler.xcworkspace
  4. Build Result-iOS scheme
  5. Build ReactiveSwift-iOS scheme
  6. Build ReactiveCocoa-iOS scheme
  7. Build Stapler scheme
  8. Run StaplerDemo target

Limitations

In its current implementation, Stapler supports offset-based pagination only. Thus, there are two requirements for your backend:

  • requests must take offset and page size as parameters
  • each response must contain tottal number of elements

Is there something missing?

Feel free to request it!

Have a question?

Feel free to create a github issue!

Latest podspec

{
    "name": "Stapler",
    "version": "0.1.0",
    "summary": "Pagination handling made easy",
    "description": "Stapler is a Swift micro framework for iOS that encapsulates all the logic for fetching and refreshing paginated data. Stapler performs necessary backend requests and provides you with a ready-to-bind-to-UI reactive data source.",
    "homepage": "https://github.com/neekeetab/Stapler",
    "license": {
        "type": "MIT",
        "file": "LICENSE.md"
    },
    "authors": {
        "Nikita Belousov": "[email protected]"
    },
    "source": {
        "git": "https://github.com/neekeetab/Stapler.git",
        "tag": "0.1.0"
    },
    "platforms": {
        "ios": "8.0"
    },
    "source_files": "Sources/*.{swift}",
    "dependencies": {
        "ReactiveCocoa": [
            "~> 7.1"
        ]
    }
}

Pin It on Pinterest

Share This