Latest 0.2.0
License MIT
Platforms ios 8.0, osx 10.9, tvos 9.0, watchos 2.0
Authors ,

🎼 Overture

Swift 4.1
iOS/macOS CI
Linux CI

A library for function composition.

Table of Contents


We work with functions all the time, but function composition is hiding in plain sight!

For instance, we work with functions when we use higher-order methods, like map on arrays:

[1, 2, 3].map { $0 + 1 }
// [2, 3, 4]

If we wanted to modify this simple closure to square our value after incrementing it, things begin to get messy.

[1, 2, 3].map { ($0 + 1) * ($0 + 1) }
// [4, 9, 16]

Functions allow us to identify and extract reusable code. Let’s define a couple functions that make up the behavior above.

func incr(_ x: Int) -> Int {
  return x + 1

func square(_ x: Int) -> Int {
  return x * x

With these functions defined, we can pass them directly to map!

[1, 2, 3]
// [4, 9, 16]

This refactor reads much better, but it’s less performant: we’re mapping over the array twice and creating an intermediate copy along the way! While we could use lazy to fuse these calls together, let’s take a more general approach: function composition!

[1, 2, 3].map(pipe(incr, square))
// [4, 9, 16]

The pipe function glues other functions together! It can take more than two argumenta and even change the type along the way!

[1, 2, 3].map(pipe(incr, square, String.init))
// ["4", "9", "16"]

Function composition lets us build new functions from smaller pieces, giving us the ability to extract and reuse logic in other contexts.

let computeAndStringify = pipe(incr, square, String.init)

[1, 2, 3].map(computeAndStringify)
// ["4", "9", "16"]

// "1849"

The function is the smallest building block of code. Function composition gives us the ability to fit these blocks together and build entire apps out of small, reusable, understandable units.



The most basic building block in Overture. It takes existing functions and smooshes them together. That is, given a function (A) -> B and a function (B) -> C, pipe will return a brand new (A) -> C function.

let computeAndStringify = pipe(incr, square, String.init)

// "1849"

[1, 2, 3].map(computeAndStringify)
// ["4", "9", "16"]


The with function is useful for applying functions to values. It plays nicely with the inout and mutable object worlds, wrapping imperative configuration in an expression.

class MyViewController: UIViewController {
  let label = with(UILabel()) {
    $0.font = .systemFont(ofSize: 24)
    $0.textColor = .red

And it restores the left-to-right readability we’re used to from the method world.

with(42, pipe(incr, square, String.init))
// "1849"


The concat function composes with single types. This includes composition of the following function signatures:

  • (A) -> A
  • (inout A) -> Void
  • <A: AnyObject>(A) -> Void

With concat, we can build powerful configuration functions from small pieces.

let roundedStyle: (UIView) -> Void {
  $0.clipsToBounds = true
  $0.layer.cornerRadius = 6

let baseButtonStyle: (UIButton) -> Void = {
  $0.contentEdgeInsets = UIEdgeInsets(top: 12, left: 16, bottom: 12, right: 16)
  $0.titleLabel?.font = .systemFont(ofSize: 16, weight: .medium)

let roundedButtonStyle = concat(

let filledButtonStyle = concat(roundedButtonStyle) {
  $0.backgroundColor = .black
  $0.tintColor = .white

let button = with(UIButton(type: .system), filledButtonStyle)

curry, flip, and zurry

These functions make up the Swiss army knife of composition. They give us the power to take existing functions and methods that don’t compose (e.g, those that take zero or multiple arguments) and restore composition.

For example, let’s transform a string initializer that takes multiple arguments into something that can compose with pipe.

// (Data, String.Encoding) -> String?

We use curry to transform multi-argument functions into functions that take a single input and return new functions to gather more inputs along the way.

// (Data) -> (String.Encoding) -> String?

And we use flip to flip the order of arguments. Multi-argument functions and methods typically take data first and configuration second, but we can generally apply configuration before we have data, and flip allows us to do just that.

// (String.Encoding) -> (Data) -> String?

Now we have a highly-reusable, composable building block that we can use to build pipelines.

let stringWithEncoding = flip(curry(String.init(data:encoding:)))
// (String.Encoding) -> (Data) -> String?

let utf8String = stringWithEncoding(.utf8)
// (Data) -> String?

Swift also exposes methods as static, unbound functions. These functions are already in curried form. All we need to do is flip them to make them more useful!

// (String) -> (Locale?) -> String

let capitalized = flip(String.capitalized)
// (Locale?) -> (String) -> String

["hello, world", "and good night"]
  .map(capitalized(Locale(identifier: "en")))
// ["Hello, World", "And Good Night"]

And zurry restores composition for functions and methods that take zero arguments.

// (String) -> () -> String

// () -> (String) -> String

let uppercased = zurry(flip(String.uppercased))
// (String) -> String

["hello, world", "and good night"]


The get function produces getter functions from key paths.

// (String) -> Int

["hello, world", "and good night"]
// [12, 14]

We can even compose other functions into get by using the pipe function. Here we build a function that increments an integer, squares it, turns it into a string, and then gets the string’s character count:

pipe(incr, square, String.init, get(.count))
// (Int) -> Int


The prop function produces setter functions from key paths.

let setUserName = prop(
// ((String) -> String) -> (User) -> User

let capitalizeUserName = setUserName(capitalized(Locale(identifier: "en")))
// (User) -> User

let setUserAge = prop(User.age)

let celebrateBirthday = setUserAge(incr)
// (User) -> User

with(User(name: "blob", age: 1), concat(
// User(name: "Blob", age: 2)

over and set

The over and set functions produce (Root) -> Root transform functions that work on a Value in a structure given a key path (or setter function).

The over function takes a (Value) -> Value transform function to modify an existing value.

let celebrateBirthday = over(User.age, incr)
// (User) -> User

The set function replaces an existing value with a brand new one.

with(user, set(.name, "Blob"))

mprop, mver, and mut

The mprop, mver and mut functions are mutable variants of prop, over and set.

let guaranteeHeaders = mver(URLRequest.allHTTPHeaderFields) { $0 = $0 ?? [:] }

let setHeader = { name, value in
    { $0.allHTTPHeaderFields?[name] = value }

let request = with(URLRequest(url: url), concat(
  mut(.httpMethod, "POST"),
  setHeader("Authorization", "Token " + token),
  setHeader("Content-Type", "application/json; charset=utf-8")


  • Should I be worried about polluting the global namespace with free functions?

    Nope! Swift has several layers of scope to help you here.

    • You can limit exposing highly-specific functions beyond a single file by using fileprivate and private scope.
    • You can define functions as static members inside types.
    • You can qualify functions with the module’s name (e.g., Overture.pipe(f, g)). You can even autocomplete free functions from the module’s name, so discoverability doesn’t have to suffer!
  • Are free functions that common in Swift?

    It may not seem like it, but free functions are everywhere in Swift, making Overture extremely useful! A few examples:

    • Initializers, like String.init.
    • Unbound methods, like String.uppercased.
    • Enum cases with associated values, like Optional.some.
    • Ad hoc closures we pass to map, filter, and other higher-order methods.
    • Top-level Standard Library functions like max, min, and zip.



If you use Carthage, you can add the following dependency to your Cartfile:

github "pointfreeco/swift-overture" ~> 0.2


If your project uses CocoaPods, just add the following to your Podfile:

pod 'Overture', '~> 0.2'


If you want to use Overture in a project that uses SwiftPM, it’s as simple as adding a dependencies clause to your Package.swift:

dependencies: [
  .package(url: "", from: "0.2.0")

Xcode Sub-project

Submodule, clone, or download Overture, and drag Overture.xcodeproj into your project.

🎶 Prelude

This library was created as an alternative to swift-prelude, which provides these tools (and more) using infix operators. For example, pipe is none other than the arrow composition operator >>>, which means the following are equivalent: >>> square), square))

We know that many code bases are not going to be comfortable introducing operators, so we wanted to reduce the barrier to entry for embracing function composition.

Interested in learning more?

These concepts (and more) are explored thoroughly in Point-Free, a video series exploring functional programming and Swift hosted by Brandon Williams and Stephen Celis.

The ideas in this episode were first explored in Episode #11:

video poster image


All modules are released under the MIT license. See LICENSE for details.

Latest podspec

    "name": "Overture",
    "version": "0.2.0",
    "summary": "A library for function composition.",
    "description": "A library for function composition.nnOverture is a collection of functions for building programs with functions.",
    "homepage": "",
    "license": "MIT",
    "authors": {
        "Stephen Celis": "[email protected]",
        "Brandon Williams": "[email protected]"
    "social_media_url": "",
    "source": {
        "git": "",
        "tag": "0.2.0"
    "platforms": {
        "ios": "8.0",
        "osx": "10.9",
        "tvos": "9.0",
        "watchos": "2.0"
    "source_files": [

Pin It on Pinterest

Share This